An ISO 9001:2008 Registered Company

Se habla Español


High Alloy Regular Split Lockwashers

Lock washers come in a few different models for various uses. They are different from flat washers because of their shape. The most common type of lock washers Split lock washers are disconnected and one side is raised a little higher than the other. Others have sharp inner or outer edges that lock them into place.

Split lock washer – the most common lock washer we sell comes in a variety of sizes and finishes and has a gap between two points. The load distribution is less even and they are often used with socket products. To be used with grades 5 & 8 fastenings

Manufactured to ASME B18.21.1 specifications
All sizes over 1" are Heavy Split Lockwashers made of 1055-1065 carbon steel

Free manufacture's certification available.
Sort by
Display per page

Item #

Size

Weight Lbs/M

Plating

Material

100WS8 1.000 in 82.14 Mechanically Zinc Yellow 1055-1065 Carbon Steel
112WS8 1 1/8 in 110.60 Mechanically Zinc Yellow 1055-1065 Carbon Steel
125WS8 1 1/4 in 157.25 Mechanically Zinc Yellow 1055-1065 Carbon Steel
14WS8 1/4 in 2.39 Mechanically Zinc Yellow AISI 4037 Alloy Steel
150WS8 1 1/2 in 263.60 Mechanically Zinc Yellow 1055-1065 Carbon Steel
31WS8 5/16 in 3.90 Mechanically Zinc Yellow AISI 4037 Alloy Steel
37WS8 3/8 in 6.35 Mechanically Zinc Yellow AISI 4037 Alloy Steel
43WS8 7/16 in 9.20 Mechanically Zinc Yellow AISI 4037 Alloy Steel
50WS8 1/2 in 12.54 Mechanically Zinc Yellow AISI 4037 Alloy Steel
56WS8 9/16 in 16.93 Mechanically Zinc Yellow AISI 4037 Alloy Steel
62WS8 5/8 in 22.46 Mechanically Zinc Yellow AISI 4037 Alloy Steel
75WS8 3/4 in 37.20 Mechanically Zinc Yellow AISI 4037 Alloy Steel
87WS8 7/8 in 58.80 Mechanically Zinc Yellow AISI 4037 Alloy Steel